变压器节能的几种方法和措施 变压器节能的四种措施一、降高空载损耗 （1）采用功能优秀的硅钢片或非晶合金片和阶梯接缝。 （2）改良死心构造和工艺，降低工艺系数。 （3）不叠上
1、风机自动控制：通过预埋在低压绕组最热处的Pt100热敏测温电阻测取温度信号。变压器负荷增大，运行温度上升，当绕组温度达110℃时，系统自动启动风机冷却;当绕组温度低至90℃时
Because of the size and weight of large transformers, it is very difficult to move these behemoths from the manufacturing plant to the equipment site. The transport of large transformers is usually by rail, road or water, usually on the basi
Key words: dry-type transformer; Characteristic; Structure; Development 1, the composition of the dry transformer dry transformer is mainly composed of two parts: the core and the winding. The iron core is composed of an iron core column and
Due to the excessive weight of large transformers, in order to reduce the weight during transportation, the oil in the transformer body will be partially or completely discharged, and the space after the oil discharge will be filled with nit
Hotline
+86-185-5293-9138
work shift
from Monday to Friday
Company phone
+86-185-5293-9138
Service