S11 series 10kV-35kV low loss non excitation voltage regulat

    Introduction of S11 series 10kV-35kV low loss non excitation voltage regulating transformer

The product complies with the national standard GB 1094-1996 power transformer and GB / t6451-2008 technical parameters and requirements for three phase oil immersed power transformer.

S11 series transformer is the latest series of low loss copper winding products. The product adopts high-quality materials, adopts new technology and new materials in coil body and insulation, so that the no-load and load losses are significantly reduced, and the performance and structure are more reliable and superior.

    Features of S11 series 10kV-35kV low loss non excitation voltage regulating transformer

Good economic performance

On the basis of S9 series, the no-load loss of S11 series products is reduced by 30%, and the no-load current is reduced by 70% - 85% compared with S9 series.

Long service life

The oil tank of transformer adopts fully sealed structure. The oil tank and the edge of the tank can be connected by bolts or welded. The transformer oil does not contact with the air, thus prolonging its service life.

High operation reliability

The reliability of the oil tank seal is increased by improving the relevant parts and components of the oil tank seal, so as to ensure the reliability of the seal.

Small floor area

S9-M, S11-M series transformer oil tank adopts corrugated plate radiator. When oil temperature changes, corrugated plate can replace oil conservator by thermal expansion and cold contraction. Corrugated plate oil tank has beautiful appearance and small floor area.