Is it necessary to install noise controller in dry-type tran

　Dry-type transformer noise, especially dry-type transformer noise, need to be controlled. The setting range of dry-type transformer is very wide, so it is generally used for dry-type transformer. The location of the dry-type transformer may not be suitable, causing inconvenience to many residents and areas. At this point, in order to control the noise of dry-type transformer, if the set of dry-type transformer noise controller, can solve this problem. For dry-type transformers, how is the noise controller set up? What's the important role?

　　Literally speaking, isolation is the function of electrical isolation, is the electrical protection device. In other words, isolation dry-type transformer is to cut off the dangerous voltage, to protect their own security of electrical equipment. Personal Safety Protection refers to the protection of workers operating equipment. The power of the transformer GA is obtained by secondary sensing, because no primary side and circuit are formed, so no electric shock will be caused. Isolating dry-type Transformer can restrain the interference caused by lightning, discharge, electric network switching, motor start-up and so on. The combination of output and input capacity is small. It is called power noise suppressor in the industry, it shows that the isolation dry-type transformer has the function of protecting equipment. The above content is the thunder wave dry type transformer factory introduces to the user the isolation dry type transformer function. In the following articles, we will discuss the principles and how to use it. The noise of the dry-type transformer can be eliminated and the volume of the dry-type transformer can be controlled by setting a noise control device. It has played a very good role to each kind of function of the dry-type transformer, may say is an indispensable one in the installment!