What is an isolating transformer and how to use it properly?

     Isolation transformer is the transformer with electrical isolation between the input winding and the output winding. Isolation transformer is used to avoid accidentally touching the live body at the same time. Early for European countries in the power industry, widely used in the electronics industry or industrial and mining enterprises, machine tools and mechanical equipment in general circuit control power, security lighting and light power. The main function of isolating transformer is to insulate the primary side completely from the secondary side and to isolate the circuit. In addition, the high-frequency loss of the iron core is used to suppress the high-frequency clutter into the control loop. The isolation transformer can only be used in the situation of small power supply range and short line. At this point, the system capacitance current to the ground is too small to cause harm to the person. There is a very important role is to protect personal safety! Isolating hazardous voltage. With the development of power system, transformer plays an increasingly important role as the key equipment in power system. Its safe operation is directly related to the reliability of the whole power system. The deformation of transformer coil is the change of axial and amplitude dimensions, displacement of transformer body, coil distortion and so on. There are two main reasons for the transformer coil deformation: one is that the transformer is inevitably impacted by external short-circuit fault in Operation;. Method of use: 1. Connect the input end of the isolation transformer to the corresponding power supply voltage (380V) , and the output end of the isolation transformer (660V) to the input end of the power supply of the required equipment. 2. Turn off the power and use it properly.