Sgb10-800kva /10 all copper dry type transformer directly su

Release time：2020-11-07 09:48:31 Popularity： Source：未知

10KV scb10-800 kva resin poured dry type transformer SCZB10 load regulating dry type transformer

Product Description:

The resin cast dry transformer is made of glass fiber and epoxy resin composite material as insulating muon, and the wound coils of high and low voltage are poured under vacuum. Based on the original introduction of German technology, the company has successfully developed a new generation of resin casting transformer with more advanced structure and beautiful appearance through digestion and absorption and continuous improvement of performance. Because the product has the characteristic of fire resistance, it is widely used in the power distribution in the factory building, office building, shopping mall, subway, airport and so on.

Capacity range: 30~2500kVA (can be increased to larger capacity according to user requirements);

Voltage class: 10kV, 20kV; 35 kV

Insulation heat resistance: Grade F, winding temperature limit 155℃;

Ambient temperature: -10℃~40℃

Cooling mode: self-cooling (AN) or air-cooling (AF)

Protection level: IP00; IP20 (indoor); IP23 (Outdoor)

Insulation level: 10KV power frequency withstand voltage 35KV, impact withstand voltage 75KV;

20KV power frequency withstand voltage 50KV, impact withstand voltage 125KV;

35KV class power frequency voltage 70KV, impact voltage 170KV.

Executive standard:

Technical Parameters and Requirements for Dry Type Power Transformers;

Gb6450-1986 Dry Power Transformer;

GB/T17211-1998 Load Guidelines for Dry Type Power Transformers;

IEC 60076-11, International Electrotechnical Commission Standard for Dry-Type Power Transformers;

According to the user's demand, we can provide grounding, rectification and other special dry transformers operating under special service conditions.

Product Features:

Maintenance-free, easier installation and lower comprehensive operation cost;

Advanced structure, safety, fire retardant, no pollution, can be directly installed in the load center;

Coil casting as a whole, low-voltage foil structure ampere-turns distribution good short-circuit resistance, high insulation level, lightning impact resistance performance;

Advanced casting process, imported vacuum casting equipment, high quality imported resin, the product appearance is bright and clean, beautiful, the local discharge value is very low, after many years the surface does not produce cracking phenomenon;

Good moisture resistance, can be put into operation without drying;

Advanced lamination method and shock absorption measures combined, low noise;

Uniform temperature division, low hot spot temperature, high reliability, strong overload capacity, forced air cooling conditions can operate 150%;

Long service life, insulation materials have been verified by the national rapid aging test.

The performance parameters

产品型号	容量(kVA)	电压组合			联结组标号	损耗(W)		空载电流(%)	阻抗电压(%)	本体总重(kg)	轨距(mm)	外形尺寸(mm) 长×宽×高
产品型号	容量(kVA)	高压(kV)	分接范围	低压(kV)	联结组标号	空载	负载	空载电流(%)	阻抗电压(%)	本体总重(kg)	轨距(mm)	外形尺寸(mm) 长×宽×高
SC10-30/10	30	6 6.3 10 10.5 11	±5% (±2× 2.5%)	0.4	Dyn11 (Yyn0)	180	740	2.3	4.0	420	550×550	950×600×900
SC10-50/10	50					250	1060	2.2		530	550×550	1100×600×1000
SC10-80/10	80					330	1470	1.7		640	550×550	1200×600×1100
SC10-100/10	100					360	1690	1.7		730	550×550	1250×700×1200
SC10-125/10	125					420	1980	1.5		820	550×550	1250×700×1200
SC10-160/10	160					490	2320	1.5		995	660×660	1190×630×1210
SC10-200/10	200					580	2690	1.3		1125	660×660	1210×630×1300
SC10-250/10	250					660	3070	1.3		1265	660×660	1250×630×1310
SC10-315/10	315					780	3690	1.1		1440	660×660	1300×740×1355
SCB10-400/10	400					890	4350	1.1		1650	660×660	1330×740×1445
SCB10-500/10	500					1040	5160	1.1		1990	820×820	1370×740×1495
SCB10-630/10	630					1160	6330	0.9	6.0	2240	820×820	1400×870×1625
SCB10-800/10	800					1370	7380	0.9		2600	820×820	1570×870×1640
SCB10-1000/10	1000					1560	8730	0.9		2940	1070×1070	1610×1150×1580
SCB10-1250/10	1250					1810	10390	0.9		3150	1070×1070	1660×1020×1850
SCB10-1600/10	1600					2400	12770	0.9		4370	1070×1070	1700×1020×1970
SCB10-2000/10	2000					2700	15330	0.7		5270	1070×1070	1820×1020×1995
SCB10-2500/10	2500					3150	18420	0.7		5820	1070×1070	1840×1020×2300

上一篇：Sgb10-200/10 all copper dry transformer manufacturer direct 下一篇：Scb10-1000kva epoxy dry type transformer all copper dry type

Back to list Related news

Sgb10-800kva /10 all copper dry type transformer directly su

Causes of automatic trip of dry type transformer

Formula for calculating power of dry type transformer

Post treatment of overtemperature trip of dry type transform

The content of power grid investment supervision

Why are transformers selling well in China for so many years

The situation analysis of the transformer industry in 2016

Online Message

Contact

QR code