SCB10-2000KVA dry-type transformer size each manufacturer production are more or less different, because the drawings are different, in addition to the product is also due to adapt to the market in the continuous upgrading. Xiaobian to provide the Wang Electric 2000KVA dry transformer size to you, 1150*1760*1540(length * width * height)mm, want to know more parameters can contact me! Learn together!
SCB10 series epoxy resin casting dry distribution transformer high and low voltage coils are made of thin layer of epoxy resin casting, good insulation performance, short circuit resistance, lightning shock resistance level. Low loss, low noise, low local discharge and high mechanical strength, high electrical strength, high heat resistance strength, so SCB10-2000KVA dry type transformer is a new generation of urban power grid transformation of environmental protection products.
SCB10-2000KVA dry-type transformer core and clamping surface by protective resin special treatment, beautiful appearance. Low pressure foil winding, high pressure using segmental multi-layer cylinder structure, so that the ampere-turns distribution balance, small leakage of magnetic field, high mechanical strength, anti-short circuit ability. Low noise cooling fan and intelligent temperature controller make the product with fault, overtemperature alarm, start and stop protection, and can implement microcomputer remote monitoring function.
Model meaning:
The SCB10 - / / / - 0.4
S: Three coherent power transformer
C: Resin casting type
B: Foil coils
10: Performance level code
□/□: Rated capacity KVA/ voltage grade KV
The shell of SCB10-2000KVA dry-type transformer is made of beautiful and durable stainless steel, which provides further safety protection for the transformer with protection level up to IP20 and IP23. IP20 can prevent the entry of solid conductors larger than 12m in diameter and provide a safety barrier for the charged part; IP23 both prevents and vertical line into the Angle of 60 ° C water droplets, can be run in the outdoor, but the IP23 shell will reduce the cooling capacity of the transformer, the lower capacity of about 5%, the larger capacity of about 10%. In addition, the design of other protection classes or materials of protective enclosures can be provided. This series of transformers can be directly installed in load centers, suitable for high-rise buildings, airports, docks, power plants, residential communities or complete sets of substations and other places.
The overall mechanical strength of the casting coil is good, and the ability to withstand short circuit is stronger than that of oil-immersed or other dry-type transformers. Since the compressive strength of epoxy resin is much higher than that of air (about 3.5-4 times), the dielectric constant value of epoxy resin is also higher than that of air, and the performance of resisting impact overvoltage is good, and the reference impact level (BIL) value is high. The moisture-proof and corrosion-resistant performance is particularly good, especially suitable for working under extreme harsh environmental conditions, and can be put into operation without drying treatment after shutdown. The bureau is small, the operation life is long.
SCB10-2000KVA dry-type transformer is oil-free, pollution-free, flame-retardant, self-extinguishing fire prevention. There is no need for separate transformer room, no need for core maintenance and load-bearing beam, saving the occupation and space of civil construction; Because there is no oil, it will not produce toxic gas, will not cause pollution to the environment, do not collect oil pits and other auxiliary buildings, reducing the cost of civil construction. Easy installation, no debugging, almost no maintenance; No need to replace and check oil, low operation and maintenance cost. SCB10-2000KVA dry-type transformer is equipped with perfect temperature protection and control system to provide reliable guarantee for the safe operation of the transformer.
Service